• Home
  • Blog
  • Freight indenting: 8 questions shippers ask the most

Freight indenting: 8 questions shippers ask the most

Read time: 5 minutes
Blogs

“Have you raised the indent yet?”

 

“Last night. Still waiting on the vehicle number.”

 

If you ship by road in India, you’ve probably had that exchange more than once. The word “indent” is everywhere in freight, yet it’s rarely explained to anyone new. This guide answers the eight questions shippers ask about it most, in plain terms.

 

The life of an indent at a glance

 

The standard process for an indent is as follows: the shipper raises the indent, the transporter accepts it, the transporter provides details of his vehicles and drivers, his vehicles are sent to the collection point and loaded with the goods, and then they depart. Below we take a more in-depth look at each of these steps, as well as where things can go wrong for each of them.

 

1. What is a freight indent?

 

A freight indent is a request to a transporter for a single vehicle to move a particular load. It is typically initiated by the logistics function of a shipper and will be raised under an existing agreement with the transporter. The transporter will then confirm the indent and advise which vehicle will attend the shipper at the appointed time.

The freight indent is the commitment to the shipment that was previously only an order in your system. When you create a freight indent, you are passing the responsibility for having a truck at your gate at the requested time to another party.

 

2. What details should an indent include?

 

A good indent leaves the transporter with nothing to guess. At a minimum, include:

  • Pickup and drop locations, with contact names and phone numbers at each.
  • The material, with weight, volume, and packaging type.
  • The vehicle type, size, and body you need.
  • The loading date and the time window.
  • Special requirements, such as a closed body, tarpaulin cover, or temperature control.
  • A reference to the contract or lane rate that applies.

 

The vehicle line causes most of the trouble. Asking for a 32 ft truck when the load fits a smaller one means paying for space you don’t use, a trade-off we covered in FTL vs. PTL: What’s the difference and when to use each. Check weight and volume before you choose the size.

 

3. How far ahead should I raise an indent?

 

As early as your plan allows. Vehicles are often committed elsewhere, so the more notice a transporter has, the more options they have to find the right one.

 

A routine many teams use is to raise indents for regular lanes a day ahead and earlier for peak weeks, when capacity tightens and quotes rise. Whatever lead time you choose, write it into the agreement with each transporter, along with a deadline by which they must confirm. An indent with no confirmation deadline can sit unanswered until the morning of loading.

 

4. Is an indent the same as a booking or an RFQ?

 

While there are a number of words in use to describe these various concepts, they are generally overlapping and often used loosely within transport teams.

 

An RFQ (Request For Quotation) is used to invite several transporters to offer a job and then to choose the best offer. An indent is used with a contracted transporter and contains a fixed number of days to run and will include an already agreed rate. A booking is the most commonly used term for a one-off spot-hire and is a confirmed arrangement with a set vehicle and rate.

 

The sequence for these three terms can vary, depending on the specific application of your team. Typically, though, you’ll issue an RFQ and select a suitable consignor (transporter) to utilize on a repetitive basis. Thereafter, you will place indents utilizing the previously-agreed terms with the chosen transporter.

 

5. Contract or spot: how are indents priced?

 

Indents are priced one of two ways.

 

Contract indents, sometimes called nominated indents, go to transporters who have agreed rates for particular lanes over a period. The price is known in advance, so you can budget around it. Spot indents are priced load by load at the going market rate and suit urgent, irregular, or overflow loads.

 

FleetOwner’s explainer on spot and contract rates notes that contract rates tend to run slightly lower than spot in exchange for assured volume and predictability. It’s a US piece, but the trade-off is the same here.

Spot prices follow supply and demand. Earlier this year, Crisil’s freight index slipped as fleet availability stayed high and cargo movement stayed weak, as reported by Autocar Professional. In a busy week, the pressure runs the other way. Most shippers use both: contracts for steady lanes and spots for the rest.

 

6. What happens if the transporter doesn’t place a vehicle?

 

It happens, and having a plan matters more than hoping it won’t. A transporter may accept an indent in good faith and still fall short on the day because the fleet behind them is stretched thin. Only about 10 percent of truck operators own more than ten trucks, and smaller ones depend on a large pool of intermediaries, so the vehicle that finally arrives can be several handoffs away from the transporter you indented.

 

A sensible process looks like this:

  • Set a confirmation deadline, and chase early, not at loading time.
  • Keep a ranked backup list for each lane, so the next call is already decided.
  • Use spot as the last resort, and record why.
  • Log every miss against the transporter, so placement rates become a number and not an impression.
  • Apply the non-placement terms in your contract, if it has them.

 

Capacity promises that quietly go unmet also change behavior on both sides. We wrote about how that erodes trust—the real bottleneck in supply chains isn’t technology anymore. It’s trust.

 

7. What charges can come with an indent?

 

Four terms come up most. All of them should be defined in your agreement, not argued about afterwards.

 

Cancellation charges apply when you cancel after a vehicle has been committed or placed. The later you cancel, the more the transporter has already spent.

 

Detention is what you pay when a vehicle waits at loading or unloading beyond an agreed free window.

 

Dead freight is the charge for capacity you reserved but didn’t use. It can arise when you indent a larger vehicle than the load needs, or when the cargo isn’t ready. Some contracts use the term, and some fold the idea into other clauses.

 

Non-placement or late-placement penalties run the other way. They apply to the transporter when a vehicle doesn’t arrive or arrives late, if your contract includes them.

 

Ask for a rate card annex that spells out free waiting hours, cancellation windows, and how each charge is calculated. Disputes over these charges usually start with a definition nobody wrote down.

 

8. How do I keep track of indents without constant calls?

 

Assign a status, owner, and due date to each raised indent. Simple stages such as raised, accepted, vehicle and driver assigned, placed, loaded, and departed are sufficient.

 

Then track it differently. Don’t have the dispatcher keep calling about every individual indent. Instead, review a single list of open indents and call the transporter only for those past the stated deadline.

 

Track 2 numbers each week: % of confirmed on-time indents and % of vehicles placed on time. This data will highlight which transporters and which lanes need attention. It’s easy enough to do with a spreadsheet, but when volumes increase, then it’s far better to have a single shared record that you and the transporter can both view.

 

A one-page indent routine to start this week

 

You don’t need new software to improve how you indent. A one-page routine is enough to start:

  1. Use one indent template, with the same fields every time.
  2. Set a confirmation deadline for every transporter.
  3. Keep a ranked backup list for each lane.
  4. Log placements and misses weekly.
  5. Review the numbers with each transporter once a month.

 

When the routine outgrows a spreadsheet, a transport management system can hold the indents, the contract rates, and the placement history in one place. Libera’s freight transport management system awards, tracks, and settles trips in one system, and we’re happy to talk through how it could fit your lanes.